From life with a 3D printer to family events and everyday know-how. A collection of personal, lived-in stories.
20 articles total
3D Printing & DIY My plan for selling ABS 3D printer filament I bought by mistake on Mercari for 1,700 yen. After the 10% selling fee and 750 yen size-60 shipping, I keep about 780 yen. Here is the math, plus the plan to drop to 1,500 yen after 2 weeks and move it to Jmoty if it still does not sell.
Family Life Before taking the kids to a free corporate museum, I compared closed days, reservations, and parking across five museums. The Kuroneko Yamato Museum has free admission, needs no reservation for fewer than 10 people, and has no parking. In October 2026 it has 3 temporary closure days. I also put together the steps to check right before you go.
Family Life After reading only my municipality's after-school club application guide, I wrote that families on childcare leave were not eligible, then corrected it based on a Children and Families Agency notice. Here I cover the gap between the national position and municipal practice, how to cross-check primary sources, what to ask your municipality, and how it differs from continuing daycare during leave.
Family Life Right after our fourth child was born, the baby was admitted to the neonatal unit, and since the insurance card wasn't ready yet, we paid the full medical bill ourselves. Here's the order for getting it back in two steps (ryoyohi from health insurance, then reimbursement from the local child medical subsidy), how this differs from the lump-sum childbirth allowance, how to read extra benefits on the notice, and the receipt-copy trap.
Family Life We were looking for a stroller for our newborn. At first we were leaning toward a model from Brand A, but once trunk-loading ease became our deciding factor, our pick changed.
Family Life With four kids, days when the whole family is free are rare. Here is the plan I put together to fit a newborn shrine visit, Shichi-Go-San and a family photo shoot into the same day, plus what I checked about timing, shrine offerings, outfits and bookings.
Family Life When choosing thank-you gifts for people who gave us baby gifts, a catalog gift was on the shortlist. We ended up not going with it, so here's how we made that call.
Family Life Our fourth child was just born. Here's what I found out about the lump-sum childbirth allowance, how the 'third child and beyond' count works for the child allowance, and Tokyo's Baby First program.
Family Life Kai's new-concept razor 'Nadesori' has been getting a lot of buzz. Since my daughter will eventually reach that age, I looked into how it works, along with reviews and things to watch out for before buying one.
Family Life I pre-ordered the Rakuten-exclusive お買いものパンダ edition of the Hobonichi Whiteboard Calendar 2027. Along with a look at the discounted 2026 version you can start using right now, here's a rundown of this write-and-erase, full-surface whiteboard calendar.
Family Life Every summer, finding jiyu kenkyu topics for all four of my kids has been a struggle. Here's my hands-on experience trying Gakken Kids Net's new AI service, plus a few things I learned to watch out for along the way.
Family Life When choosing an electronic dictionary as a study tool for your child, how should you weigh grade level, content volume, and price? Here's a rundown of the points we actually compared when picking a digital dictionary for elementary school.
Family Life After seeing a forecast of more typhoons than usual this summer, I took stock of our family's disaster supplies. Here's how I organized it, from the perspective of a household with several kids, including preparing our phone and communications setup.
3D Printing & DIY Turns out my family owns a 3D printer. This time I want to share how I've turned that hobby into projects with my kids — from choosing the right design tool for the job, to the builds that were a hit, to using it for kanji learning. Here's a rundown of what's worked well for us.
3D Printing & DIY I've actually gotten interested in 3D printing lately. Before buying a printer, I tried designing parts myself and outsourcing the actual printing. Here's that experience and a sense of the costs involved.
3D Printing & DIY Since starting 3D printing with a Bambu Lab A1 mini, I've picked up real-world lessons on when to use PLA, PETG, or TPU, plus the 0.2mm nozzle and how to store filament properly.
3D Printing & DIY A record of how I used Gridfinity, an open-source storage standard, together with my home 3D printer, the Bambu Lab A1 mini, to organize my desk drawer and my kids' study supplies. Here's a rundown of how the system works and how to get started.
3D Printing & DIY I actually started a new hobby a while back: 3D printing. This first post covers how I decided on the Bambu Lab A1 mini — the process type, the size, solo unit or combo set, and even the timing of the purchase.
Family Life I opened a bank account in my child's name at Rakuten Bank. Here's what I learned about how few online banks actually offer minor accounts, and why keeping the money separate turned out to be worth it.
Family Life Weekday evenings had turned into a bit of a tightrope walk between housework and childcare, so I tried splitting the time into fixed blocks. Here's what I noticed after putting it into practice — the benefits and a few things to watch out for.