- 01An unfamiliar charge of about 800 yen a month
- 02How billing accounts and projects relate
- 03Narrowing it down with the Reports page
- 04Charge period and billing period look different
- 05Matching against the invoice with the cost table
- 06How to think about free tiers and the free trial
- 07A budget alert notifies, it does not cap
- 08How to create a budget alert
- 09Choosing thresholds and notification targets
- 10Delays and gaps in the numbers
- 11What to do after you find it
- 12Who this suits and common mistakes
- 13FAQ
- 14Official sources I referred to
- 15Summary
Good morning. This is まさきん.
At our house, an item we had stopped using showed up again on the bill at about 800 yen a month. It is a small amount, but I do not like leaving a charge unexplained. So I checked the details in the Google Cloud billing reports and set up a budget alert of 1,000 yen a month. Here is that flow, written up as a way to check charges you do not recognize.
※This article reflects information at the time of publication. Please check the official sites for the latest terms.
- To find the source, switch the Reports page between service, SKU and project views
- To match against an invoice, the cost table (completed months only) is the better fit
- A budget alert only notifies. It does not stop usage or charges (per the official docs)
- Default thresholds are 50%, 90% and 100% of actual cost, and you can add forecast thresholds
- Even for small amounts, a low monthly budget helps you notice sooner
An unfamiliar charge of about 800 yen a month
At our house, an item we had stopped using came back on the bill at about 800 yen a month. It is easy to overlook an amount like that.
But fixed costs work by small things continuing quietly. Over a year it is close to 10,000 yen, so there is no reason to ignore it.
This article does not go into what the charge actually was. It focuses on where to look and how to narrow things down when you meet a charge you do not recognize, and on a mechanism that warns you if it comes back.
I covered the card-statement side in another article. How to find charges that continue after you marked a cancellation as done may help as well.
How billing accounts and projects relate
First, how Google Cloud organizes billing. The official documentation describes a billing account as the account used to pay for usage.
To use resources in a project, the project must be linked to an active billing account. A project that is not linked cannot be used, even for free services.
Projects hang under a billing account. For an unfamiliar charge, I think it helps to think in two steps.
- Which billing account is it posted to
- Within it, which service in which project
Narrowing it down with the Reports page
The entry point is the Reports page in Billing. The official docs say that selecting a billing account opens Reports. By default it shows this month’s cost by service.
The steps are as follows.
- Open the Billing page in the Google Cloud console
- Select the billing account you want to check
- Set the time range (start with this month and last month)
- Group by service and look from the largest amount
- Narrow to the service you care about and switch to SKU
- Switch to project to see where it occurred
Costs not tied to a specific project are shown separately, according to the docs. An amount missing from the project list may be sitting there.
After changing a filter, press Apply. If you forget, the old view stays, so watch out.
Charge period and billing period look different
The time range has two types. If you mix them up, the amounts look wrong.
| Type | Basis | Feature |
|---|---|---|
| Charge period (formerly Usage date) | Usage date | Taxes and adjustments are not included |
| Billing period (formerly Invoice month) | Invoice month | Includes tax, credits and adjustments |
To follow daily movement, the usage-date basis fits well. It shows when things started to rise.
To compare with the card bill, the invoice-month basis is closer. Because tax is included, the total differs slightly from the usage-date total.
Also, a day starts at midnight US and Canada Pacific time (UTC-8), according to the docs. It differs from Japan time, so usage near a month boundary can look split across months.
Matching against the invoice with the cost table
Once the Reports page gives you a lead, confirm it in the cost table. It shows the breakdown of an invoice or statement as a table.
According to the official docs, with the default filter the total matches the invoice total. That is useful when comparing with the card bill.
It covers completed invoice months, and the first view is the latest completed month. For the current month in progress, use Reports.
The default view nests Project > Service > SKU > Consumption model, and you expand a row for the breakdown. Columns include service, SKU, cost type (usage, adjustment, tax and so on), usage amount and cost.
You can also download a CSV, which may help when copying into a household ledger. Three points to look at:
- Whether the cost type is usage, tax or adjustment
- The usage amount (it should be near zero if you are not using it)
- Whether the same SKU appeared in the previous month
How to think about free tiers and the free trial
Sometimes a misunderstanding of free usage sits behind an unfamiliar charge. The official docs explain two kinds of free offerings.
| Item | Free trial | Always Free |
|---|---|---|
| What it is | 90 days and 300 dollars of credit | 20+ products free within monthly limits |
| Duration | 90 days or until credit is used | No expiry |
| Beyond the limit | Paid from the credit | Charged at regular rates |
| Carry over | None | Unused amounts do not carry over |
Always Free limits are calculated monthly per billing account. The key point is that the free tier is a monthly limit, not a credit.
Google may also change the offering or limits with 30 days notice, according to the docs. Something free today could change later.
Know how the trial ends too. If you upgrade manually to a paid account, resources you created keep running. Usage beyond credit and free limits is billed.
On the other hand, running out of credit or passing 90 days can lead to the account closing automatically. Billing is disabled and resources stop. If you do not upgrade within the 30-day grace period, they are permanently deleted.
A budget alert notifies, it does not cap
Now to preventing a repeat. First, a point that is easy to misunderstand.
The official docs explain that an alerts-only budget does not stop spending or usage automatically. When a threshold is reached, it only sends a notification by email or Pub/Sub.
So it is not a mechanism that stops at 1,000 yen a month. Usage continues past it, and so do charges.
The docs recommend setting the budget lower than the funds you can use. I think that leaves you time to act after the notice.
There is also a spend cap budget for supported services if you want automatic limits. But it does not guarantee stopping everything.
So I treat a budget alert as a way to notice. Stopping is my job after I see the notice.
How to create a budget alert
These steps follow the official documentation. Screen labels can change, so check the exact names on your screen.
- Open the budget creation screen from the Billing page
- Choose alerts-only as the type and enter a name
- Decide whether it covers the whole billing account or a single project
- Set the scope (projects, services and so on)
- Enter the budget amount as a specified amount (for example 1,000 yen a month)
- Decide the threshold rules and notification targets
- Save with Done
The period can be monthly, quarterly, yearly or custom, and monthly is the default. Monthly resets actual cost to zero each month, which I think suits watching fixed costs.
You can also base the amount on the previous period’s spend. But if last month was large, the target rises too. For small amounts, a specified amount may be easier to read.
Check permissions too. For managing at billing account level, the docs recommend roles such as Billing Account Costs Manager.
Choosing thresholds and notification targets
The default thresholds are 50%, 90% and 100% of actual cost. You can add, remove or change them.
Actual notifies when accumulated cost passes the threshold. Forecast notifies when the projected cost to the end of the period is expected to pass it.
| Type | When you are notified | Best use |
|---|---|---|
| Actual | Accumulated cost passed the threshold | Know for sure it was exceeded |
| Forecast | End-of-period forecast will likely pass it | Know early, before exceeding |
For a small amount, actual 100% alone may be enough. If you want to notice mid-month, how about adding forecast too? Forecast thresholds are not available for custom periods.
Notifications go by email by default. They reach billing admins and billing users of the billing account. For a single-project budget, they can go to project owners too.
To send to another address, link a Cloud Monitoring notification channel. With Pub/Sub you can forward to Slack and so on. For a household, email is probably enough.
Email notifications need at least one threshold rule. If you delete the thresholds, the email setting is disabled too.
Delays and gaps in the numbers
A budget alert is not real-time monitoring. The official docs list several cautions.
- The first notification can take several hours after creation
- Usage takes time to appear in billing data
- A monthly budget keeps counting until the 2nd of the next month
- Judgment uses the amount after discounts and credits
- Taxes are included in the calculation
Credits matter most. If they offset the cost and the amount stays under a threshold, no email is sent. To watch gross cost without discounts, uncheck all savings types in the scope.
If you pick only some projects, charges not tied to a project, such as support, are not included. Selecting all includes them. To avoid gaps, covering everything is safer.
What to do after you find it
Once you are sure it is unneeded, move on to stopping it.
| Level | Action | Caution |
|---|---|---|
| Resource | Stop or delete what you do not need | Deletion may not be reversible |
| Project | Disable billing | All billable services stop |
| Billing account | Close the account | Linked projects stop |
Disabling billing on a project stops its billable services and charges. But some resources may be deleted and cannot be restored, according to the docs. Backing up first is recommended.
Charges incurred before disabling are billed to the previously linked billing account. Reporting can take up to 2 days.
Closing a billing account has a larger impact. The docs mention disabling billing on the project as an alternative to closing.
When unsure, I think it is safer to back up and check usage before deleting.
Who this suits and common mistakes
I think this approach suits people like these.
- You have signed up for cloud or developer services as a trial
- A small charge has been buried in a card statement before
- You want to watch fixed costs with a mechanism
On the other hand, if you cannot act after a notice, you may need another safeguard. The same goes if you lack billing permissions.
Common mistakes:
- Creating an alert and assuming it will stop things
- Missing the email because it went to spam
- Targeting only some projects and missing unattached charges
- Setting the budget too high so small charges are buried
- Mixing usage date and invoice month and wondering why amounts differ
You do not need to make a fixed cost review perfect in one go. Small steps last longer, like reviewing one contract per week.
Before you start, it helps to confirm the following.
- I am a billing admin or have the needed permissions
- I confirmed the email address that receives notifications
- I decided the period and amount (for example monthly and 1,000 yen)
- I decided whether to cover everything or part
- I understand a budget alert does not stop anything
- I know how to stop a charge once I judge it unneeded
Clicking this opens the Rakuten login page. Once you log in, you’ll see the campaign details.
FAQ
Q. Does a budget alert automatically stop at the limit?
No. The official docs explain that an alerts-only budget does not stop spending or usage, and only notifies. To stop, you disable billing yourself. You can also consider a spend cap budget for supported services.
Q. Does the first notification arrive right away?
Not necessarily. The docs say it can take several hours from creation. Usage also takes time to appear, so a lower budget is recommended.
Q. Where do I investigate an unfamiliar charge?
Start with Reports in Billing and narrow by service, SKU and project. Then match against the invoice in the cost table for a completed month. For the card statement side, see my other article.
Q. What is the difference between Reports and the cost table?
Reports let you view even this month in progress. The cost table shows a completed month as a table. By default its total matches the invoice.
Q. If it is in the free tier, will I not be charged?
Always Free is free within the monthly limit. Beyond it, regular rates apply. Limits are monthly per billing account, and unused amounts do not carry over.
Q. Does disabling project billing stop charges completely?
Billable services and charges stop. But charges from before disabling are still billed. Some resources may be deleted and unrecoverable, so I recommend a backup.
Q. Who receives the budget alert emails?
By default, billing admins and billing users of the account. For a single-project budget, project owners too. For another address, link a Cloud Monitoring channel.
Q. How much should the monthly budget be?
It depends on the person. As a way of thinking, setting it slightly above your usual bill makes new charges easier to notice. If you normally stay within free usage, lower may be fine.
Official sources I referred to
- Create, edit, or delete budgets and budget alerts (Cloud Billing)
- Cloud Billing reports overview
- Cost table report
- Google Cloud free features (trial and Always Free)
- Enable, disable, or change billing for a project
- Cloud Billing accounts overview
Summary
Even a small unfamiliar charge is worth checking with a proper process.
Narrow it with Reports, confirm with the cost table, then guard against a repeat with a budget alert. A budget alert only notifies, and it does not stop anything. That is the one point to remember.
At our house, we now watch with a 1,000 yen monthly budget alert. Why not open the Reports page of your own billing account first?
Clicking this opens the Rakuten login page. Once you log in, you’ll see the campaign details.
This article contains affiliate advertising. If you sign up for a product or service through a link on this site, we may receive compensation from the partner company. The site operator is also an employee of Rakuten Group and may receive compensation through an employee referral program. The content and opinions here are based on the operator’s own experience and research regardless of any advertising relationship, but please read with the above in mind. See the Disclaimer & Affiliate Disclosure for details. Disclaimer & Affiliate Disclosure
This article includes machine-translated content. Please check the official Rakuten Mobile multilingual page for exact terms.
If you have concerns about Rakuten Mobile coverage or signal quality, you can consult through the official signal improvement request form .